Commercial Service Tool
| Tool name | Description | |
|---|---|---|
| Bit ratchet |
|
Remove mode door motor A: 25mm (0.984 in) - 45mm (1.772 in) |
Other materials
Stop/start System Inoperative
Diagnosis Procedure
NOTE:
Check the stop/start system operation condition. Refer to System Description.CHECK STOP/START PROHIBIT CAUSE
With CONSULT
Select “Stop/Start prohibit cause data recorder” in “Work support” mode of “ENGINE” using CONSULT.
Does "Stop/Start prohibit cause data reco ...
Transfer: Atx93a Tools and Preparation
Preparation
Commercial Service Tools
Tool name Description
Drift
a: 61.0 mm (2.402 in) dia.
b: 56.3 mm (2.217 in) dia.
Installing front oil seal
Drift
a: 66.3 mm (2.610 in) dia.
b: 61.9 mm (2.437 in) dia.
Installing rear oil seal
Drift
a: 68.6 mm (2.701 in) dia.
b: 58.0 mm (2.28 ...
Configuration (air Bag Diagnosis Sensor Unit)
Description
Vehicle specification needs to be written with CONSULT because it is not written after replacing the air bag diagnosis sensor unit.CONSULT connects to network and then it downloads the configuration data from the server. Then CONSULT writes the vehicle specification to the air bag diagno ...