Nissan Armada 2025-2026 Service and Repair Manual: Heater & Air Conditioning System — Service Data and Specifications (sds)

Removal and Installation

REMOVAL Remove rear A/C unit assembly. Refer to Removal and Installation. Remove cooler packing. Remove cooler grommet. Remove heater pipe support fixing screws . Disengage fixing pawls, and then re ...

Service Data and Specifications (sds)

...

Other materials:

Work Procedure
After replacing the ADAS control unit 2 and after replacing or removing the following steering components, the steering torque calibration is necessary to operate the system normally. Steering wheel Spiral cable Steering angle sensor Steering column assembly Steering gear assembly NOTE: Follow the ...

Removal and Installation
REMOVAL Remove rear bumper fascia assembly. Refer to Removal and Installation. Remove rear reflex reflector fixing screws . Disengage rear reflex reflector fixing pawls, and then remove rear reflex reflector. : Pawl INSTALLATION Install in the reverse order of removal. ...

Diagnosis Procedure
SYMPTOM CHECK 1 Check that there are pedal vibrations when the engine is started. Do vibrations occur? YES>> GO TO 2. NO>> Check the brake pedal. Refer to Inspection. SYMPTOM CHECK 2 Check that motor sound from ABS actuator and electric unit (control unit) occurs when the engine starts ...