Nissan Armada 2025-2026 Service and Repair Manual: Hill Descent Control Switch

VDC OFF SWITCH : Removal & Installation

REMOVAL NOTE: The VDC OFF switch is integrated with the select switch unit. Remove front center console switch finisher assembly. Refer to Removal and Installation. Remove the screws , and remove sele ...

Removal and Installation

NOTE: The hill descent control switch is integrated with the Drive Mode Select switch. Remove drive mode select switch. Refer to Removal and Installation. ...

Other materials:

Special Service Tools
Tool number (TechMate No.) Tool name Description KV40104001 (NI-53385) Hub lock nut wrench a: 85 mm (3.35 in) b: 65 mm (2.56 in) Removing and Installing wheel hub lock nut. KV40107300 (NI-51751) Boot band crimping tool Installing boot band KV38108000 ( - ) Protector a: 47 mm (1.85 in) dia. b: ...

Exploded View
Drive pinion lock nut Companion flange Front oil seal Pinion front bearing Collapsible spacer Gasket Filler plug Drain plug Mounting insulator Gear carrier Mounting insulator Breather connector Side shaft bearing Snap ring Snap ring Side oil seal Side shaft Pinion rear bearing Pi ...

System maintenance
If the AEB with Pedestrian Detection system in the Nissan Armada detects a malfunction, it will automatically deactivate to prevent incorrect operation. In such cases, an audible chime will sound, the AEB system OFF warning light (orange) will illuminate, and the message "Malfunction See ...