Removal and Installation
REMOVAL
Remove hood assembly. Refer to Removal and Installation.
Remove front fender assembly. Refer to Removal and Installation.
Remove hood hinge mounting bolts, and then remove hood hinge.
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
-
Before installation, apply anticorrosive agent onto mounting surface.
-
Before installation, check the hood hinge rotating part for poor lubrication. Refer to Inspection.
-
When installation, perform the fitting adjustment. Refer to Adjustment.
-
After installation, apply touch-up paint (the body color) if the paint around hinge is peeled off during removal.
-
After installation, check the open/close operation. Refer to Inspection.
Other materials
Brake Pedal
Inspection and Adjustment
INSPECTIONBrake Pedal HeightCheck the height (H1) between the floor panel and the brake pedal upper surface. H1
: Refer to Brake Pedal.
CAUTION:
Remove the front floor carpet.Stop Lamp SwitchCheck the clearance (A) among the brake pedal lever and the stop lamp switch ...
Action Test
Work Procedure
Always perform the AEB system action test to check that the system operates normally after replacing the ADAS control unit 2, replacing the AEB system malfunction.CHECK AEB SYSTEM SETTING
Start the engine.
Check that the AEB system setting can be enabled/disabled on the informatio ...
Normal Operating Condition
Description
Symptom Possible cause
Unstable object detection
The vehicle is on a rough surface, such as stone or gravel.
When used in poor weather conditions, such as heavy snow/rain or strong wind.
When subjected to an ultrasonic noise generated from exhaust muffler or brakes.
When le ...