Removal and Installation
REMOVAL
Apply protective tape (A) on the part to protect it from damage.
Disengage hood seal fixing clips 
using a remover tool (A), and then remove hood seal 
.
INSTALLATION
Install in the reverse order of removal.
Other materials
Noise, Vibration and Harshness (nvh) Troubleshooting
NVH Troubleshooting Chart
Use the chart below to find the cause of the symptom. The numbers indicate the order of the inspection. If necessary, repair or replace these parts.
SUSPECTED PARTS
(Possible cause) Symptom Reference
Transfer fluid leakage Noise
TRANSFER FLUID (Level low)
1 ...
Configuration (air Bag Diagnosis Sensor Unit)
Description
Vehicle specification needs to be written with CONSULT because it is not written after replacing the air bag diagnosis sensor unit.CONSULT connects to network and then it downloads the configuration data from the server. Then CONSULT writes the vehicle specification to the air bag diagno ...
Corrosion Protection
Description
To provide improved corrosion prevention, the following anti-corrosive measures have been implemented in NISSAN production plants. When repairing or replacing body panels, it is necessary to use the same anti-corrosive measures.ANTI-CORROSIVE PRECOATED STEEL (GALVANNEALED STEEL)To improv ...