Nissan Armada 2025-2026 Service and Repair Manual: Hood Insulator

Disposal

CAUTION: When performing disposal operation, wear the protective glasses and protective gloves. Fix hood stay using a vise (C). CAUTION: When cutting a hole on hood stay, always cover a hacksaw (A) ...

Removal and Installation

REMOVAL Remove hood insulator fixing clips , and then remove hood insulator. INSTALLATION Install in the reverse order of removal. ...

Other materials:

Inspection
INSPECTION AFTER REMOVAL Appearance Propeller Shaft Runout Propeller shaft runout : Refer to Propeller Shaft Tube. Journal Axial Play Journal axial play : Refer to Journal. Joint Flex Torque Joint flex torque : Refer to Journal. Center Bearing Check center bearing for noise and damage. ...

Inspection
CRANKSHAFT END PLAY Measure the clearance between thrust bearings and crankshaft arm when crankshaft is moved fully forward or backward with a dial indicator. Standard and limit : Refer to CylinderBlock. If the measured value exceeds the limit, replace thrust bearings, and measure again. If it s ...

LIQUID GASKET
REMOVAL OF LIQUID GASKET SEALING After removing mounting nuts and bolts, separate the mating surface using the seal cutter [SST: KV10111100 (NI-37228)] (A) and remove old liquid gasket sealing. CAUTION: Never damage the mating surfaces. Tap the seal cutter [SST: KV10111100 (NI-37228)] to insert it ...