Exploded View
 |
Horn low |  |
Horn high |  |
Radiator core support |
| : vehicle front | |||||
 |
: N·m (kg-m, ft-lb) | ||||
Removal & Installation
REMOVAL
Horn High
Remove front bumper fascia assembly. Refer to Removal and Installation.
Disconnect harness connector 
.
Remove mounting bolt , and then remove horn high.
CAUTION:
Never disassemble horn bracket from horn.
Horn Low
Remove front grille upper. Refer to Removal and Installation.
Disconnect harness connector .
Remove mounting bolt , and then remove horn low.
CAUTION:
Never disassemble horn bracket from horn.
INSTALLATION
Install in the reverse order of removal.
Other materials
Memory Storing
Description
Always perform the memory storage when the driver seat control unit or steering column control module is replaced. The memory function will not operate normally if no memory storage is performed. For details, refer to Work Procedure.
Work Procedure
Memory Storage ProcedureTwo positions f ...
Hood Lock Control Cable Assembly
Removal and Installation
REMOVALDisconnect hood lock control cable assembly from hood lock assembly. Refer to Removal and Installation.
Disengage hood lock control cable assembly fixing clips.
Remove hood lock control handle. Refer to Removal and Installation.
Remove dash side finisher LH. Refer to ...
Rear Door Regulator
Exploded View
For exploded view of rear door regulator, refer to Exploded View.
Removal and Installation
REMOVALCAUTION:
Never damage rear door glass and rear door panel.Remove rear door glass. Refer to Removal and Installation.
Disengage fixing portion using a remover tool (A) according to numeric ...