| Condition | Specification |
|---|---|
| No load* (in P or N position) | 12 ± 5° BTDC |
*: Under the following conditions
A/C switch: OFF
Electric load: OFF (Lights, heater fan & rear window defogger)
Steering wheel: Kept in straight-ahead position
Idle Speed
Calculated Load ValueFluids and Lubricants
Recommended Fluid and Lubricants
The following are approximate capacities. The actual refill capacities may be slightly different. When refilling, follow the procedures described elsewhere in this manual.
Fluid type Capacity (approximate) Recommended Fluids/Lubricants Metric
Measure US
Measure Im ...
Special Service Tools
Tool number
(TechMate No.)
Tool name Description ST35652000
( − )
Shock absorber attachment
Disassembling and assembling shock absorber ST3127S000
(NI-25765-A)
Preload gauge
Measuring rotating torque of ball joint ...
Removal and Installation
WARNING:
REMOVAL
Ignition coil
NOTE:
No. 2-No. 5 can be removed using only the ignition coil.
Remove engine cover. Refer to Removal and Installation.
Remove mounting bolt from air inlet tube 1 . (No. 1 and No. 6 cylinder)
: Vehicle front
Remove mounting bolt from air inlet tube 1 . (No. 1 and ...