Exploded View
 |
Cover |  |
Indicator unit |
Removal and Installation
REMOVAL
Remove cover. Refer to Removal and Installation.
Remove indicator unit fixing screws 
, and then remove indicator unit.
INSTALLATION
Install in the reverse order of removal.
Other materials
Precautions
Precautions for Removing Battery Terminal
When disconnecting the 12V battery terminal, turn off the ACC power before disconnecting the 12V battery terminal, observing “How to disconnect 12V battery terminal” described below.
NOTE:
Some ECUs operate for a certain fixed time even after ignit ...
P Range Interlock Door Unlock Function Does Not Operate
Diagnosis Procedure
CHECK “AUTO DOOR UNLOCK” SETTING IN COMBINATION METER
Check “Auto Door Unlock” setting is “Shift to P”.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Set “Shift to P” in combination meter.
REPLACE BCM
Replace BCM. Refer to Removal and Instal ...
Inside Key Antenna
Console
Removal and Installation
REMOVALRemove front center console bracket. Refer to Removal and Installation.
Disconnect inside key antenna (console) harness connector.
Remove inside key antenna (console) fixing TORX bolts , and then remove inside key antenna (console) .
INSTALLATIONInstall in t ...