Exploded View
Occupant detection system sensor is built in to seat frame assembly of passenger seat.
For exploded view, refer to Exploded View.
Removal and Installation
CAUTION:
Removal of single part is not possible. For removal, remove seat frame assembly of passenger seat as a set.
For removal and installation, Refer to Disassembly and Assembly.
Other materials
Noise, Vibration and Harshness (nvh) Troubleshooting
NVH Troubleshooting Chart
Use the chart below to find the cause of the symptom. The numbers indicate the order of the inspection. If necessary, repair or replace these parts.
SUSPECTED PARTS
(Possible cause) Symptom Reference
Transfer fluid leakage Noise
TRANSFER FLUID (Level low)
1 ...
Steering Angle Sensor
Removal and Installation
REMOVALRemove spiral cable assembly. Refer to Removal and Installation.
Remove steering angle sensor from spiral cable.INSTALLATIONNote the following, and install in the reverse order of removal.
When replacing the angle sensor , if the lock pin is installed, remove the lo ...
12v Sub Battery (lithium Ion Battery)
Exploded View
12V SUB BATTERY (LITHIUM ION BATTERY) HARNESS
12V sub battery (lithium ion battery) harness 1
: To 12V sub battery (lithium ion battery)
: vehicle front
: N·m (kg-m, in-lb)
: N·m (kg-m, ft-lb)
12V SUB BATTERY (LITHIUM ION BATTERY)
:12V ...