INSPECTION AFTER REMOVAL
Inspect air duct and resonator assembly for crack or tear.
If anything is found, replace air duct and resonator assembly
Removal and InstallationDisassembly and Assembly
DISASSEMBLY
Remove door mirror assembly. Refer to Removal and Installation.
Remove door mirror cover. Refer to Removal and Installation.
Disconnect all terminals from harness connector .
NOTE:
Make a mark (short note, photo, etc.) of terminals layout, before disassembly.
Remove harness clip and v ...
Precautions for Removing Battery Terminal
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...
Exploded View
Drive pinion lock nut Companion flange Front oil seal Pinion front bearing Collapsible spacer Gasket Filler plug Drain plug Mounting insulator Gear carrier Mounting insulator Breather connector Side shaft bearing Snap ring Snap ring Side oil seal Side shaft Pinion rear bearing Pi ...