INSPECTION AFTER INSTALLATION
Check that the reservoir tank cap is tightened.
Check for leakage of engine coolant using the radiator cap tester adapter and the radiator cap tester (commercial service tool). Refer to ENGINE COOLANT : Inspection.
Removal and InstallationTwisting
This refers to deformation of side frame-to-crossmember joints due to rollover caused by a collision accident. The right and left frames/members are twisted in the axially opposite direction to each other. In the body alignment dimensions, the height values of the side frame measurement points locat ...
Symptom Table
Gauge indication Refrigerant cycle Probable cause Corrective action Both high- and low-pressure sides are too high.
The pressure returns to normal soon after sprinkling water on condenser. Overfilled refrigerant. Collect all refrigerant, evacuate refrigerant cycle again, and then refill it w ...
Main Bearing
MAIN BEARING
Unit: mm (in)
Grade number Thickness Width Identification color Remarks 0 2.500 - 2.503 (0.0984 - 0.0985) 19.9 - 20.1
(0.783 - 0.791) Black - Black Grade is the same for upper and lower bearings. 1 2.503 - 2.506 (0.0985 - 0.0987) Brown - Brown 2 2.506 - 2.509 (0.0987 - 0. ...