INSPECTION AFTER INSTALLATION
Check fluid leakage and the fluid level. Refer to Inspection.
ADJUSTMENT AFTER INSTALLATION
When transfer case component parts are removed, performe writing unit parameter. Refer to Description.
Removal and Installation
Rear Oil SealCenter Pillar
WARNING:
Urethane foam Unit: mm (in) : Vehicle front
*: For spot welding of steel plate of tensile strength 980 MPa, observe the indicated welding conditions. Refer to Welding of Ultra High Strength Steel. Replacement part • Outer front side body • Lower center pillar brace
Urethan ...
Removal and Installation
CAUTION:
Never damage rear door panel.
REMOVAL
CAUTION:
Fully open rear door.
Remove pull handle cap.Apply protective tape (A) on rear door finisher to protect it from damage.
Remove pull handle cap using a remover tool (A).
Remove rear door finisher fixing screws .
Remove inside handle cap.App ...
Removal and Installation
WARNING:
REMOVAL
Remove tires. Refer to ROAD WHEEL TIRE : Removal & Installation.
Remove brake hose bracket. Refer to Removal and Installation.
CAUTION:
Never depress brake pedal while brake caliper is removed.
Remove disc rotor.
CAUTION:
Never drop disc rotor.
Remove wheel sensor harness. Re ...