Check radiator for mud or clogging. If necessary, clean radiator as per the following:
Be careful not to bend or damage radiator fins.
When radiator is cleaned without removal, remove all surrounding parts such as radiator cooling fan assembly and horns. Then tape harness and connectors to prevent water from entering.
Apply water by hose to the back side of the radiator core vertically downward.
Apply water again to all radiator core surfaces once per minute.
Stop washing if any stains no longer flow out from radiator.
Blow air into the back side of radiator core vertically downward.
Use compressed air lower than 490 kPa (5 kg/cm2, 71 psi) and keep distance more than 30 cm (11.8 in).
Blow air again into all the radiator core surfaces once per minute until no water sprays out.
Radiator
Fuel LinesRemoval and Installation
CAUTION:
REMOVAL
Remove side turn signal lamp. Refer to Removal and Installation.
Remove puddle lamp harness connector from door mirror housing assembly .
: Vehicle front
Disconnect puddle lamp harness connector.
Remove puddle lamp fixing screw, and then remove puddle lamp assembly.
Disengage ...
Removal and Installation
REMOVAL
CAUTION:
Never use a material for remover tool which could damage body side panel.
Fully open front door and rear door.
Apply a protective tape (A) on the parts to protect it from damage.
Cut double-sided tapes using a remover tool (A) and cutter (B), and then remove parting seal C.
CAUT ...
Removal and Installation
REMOVAL
CAUTION:
Remove front grille. Refer to the following.
Off road models: Removal and Installation
City models: Removal and Installation
Remove front bumper fascia. Refer to the following.
Off road models: Removal and Installation
City models: Removal and Installation
Remove radiator air gu ...