Nissan Armada 2025-2026 Service and Repair Manual: Inspection
For front seat belt illustration. Refer to Exploded View.
For second seat belt illustration. Refer to Exploded View.
For third seat belt illustration. Refer to Exploded View.
CAUTION:
After any collision, inspect all seat belt assemblies, including retractors and other attached hardwares (I.e. anchor bolt, guide rail set). Nissan recommends to replace all seat belt assemblies in use during a collision, unless not damaged and properly operating after minor collision.
Also inspect seat belt assemblies not in use during a collision, and replace if damaged or improperly operating.
Seat belt pre-tensioner should be replaced even if the seat belts are not in use during a frontal collision where the driver and passenger air bags are deployed.
If any component of seat belt assembly is questionable, do not repair.
Replace as seat belt assembly.
If webbing is cut, frayed, or damaged, replace belt assembly.
Never oil tongue and buckle.
Use a genuine NISSAN seat belt assembly.
For details, refer to Inspection, Inspection, Inspection in SB section.
Check anchors for loose mounting
Check belts for damage
Check retractor for smooth operation
Check function of buckles and tongues when buckled and released
Other materials:
Rotation
WARNING:
Follow the maintenance schedule for tire rotation service intervals. Refer to General Maintenance.
When installing the wheel, tighten wheel nuts to the specified torque. Refer to ROAD WHEEL TIRE : Exploded View.
CAUTION:
When installing wheels, tighten them diagonally by dividing the work ...
Exploded View
Back door panel Intelligent rear view mirror camera Intelligent rear view mirror camera harness connector : Vehicle front : N·m (kg-m, in-lb) ...
Anti-Pinch Inspection
If any of the following operations are performed, the initialization is necessary for normal operation of anti-pinch function. Refer to Work Procedure.
When each power window motor replaced.
Power supply to the each power window motor is not cut off properly.
Removal and installation of regulato ...
0.0049