INSPECTION AFTER INSTALLATION
Check fluid leakage and the fluid level. Refer to Inspection.
ADJUSTMENT AFTER INSTALLATION
Removal and InstallationInspection Procedure
INSTRUMENT PANEL
Most incidents are caused by contact and movement between:
Cluster lid A and instrument panel
Acrylic lens and combination meter housing
Instrument panel to front pillar garnish
Instrument panel to windshield
Instrument panel mounting pins
Wiring harnesses behind the combination met ...
Exploded View
Circular clip Dust shield Housing Snap ring Ball cage/steel ball/inner race assembly Stopper ring Boot band Boot Shaft Circular clip Joint sub-assembly : Wheel side : Always replace after every disassembly. 1: NISSAN Genuine grease or equivalent. 2: Apply paste [service parts (44003 ...
Work Procedure
WARNING:
REPLACE A/T ASSEMBLY
Replace A/T assembly. Refer to Removal and Installation (2WD) or Removal and Installation (4WD).
>>
GO TO 2.
WRITING Vehicle SPECIFICATIONS
With CONSULT
Ignition switch ON.
Select "TRANSMISSION".
Select "Replace ECU".
Perform the work according to the procedure ...