Nissan Armada 2025-2026 Service and Repair Manual: Unit Removal and Installation

Removal and Installation

WARNING: REMOVAL Remove air breather hose A from transfer assembly. Remove clip A . Remove clip B . Remove A/T air breather hose. Refer to Removal and Installation. Release clip C and remove a ...

Transfer Assembly

...

Other materials:

Removal and Installation
CAUTION: There are some cautions for the clips of "Reuse" removal/install procedure. If you want reuse back door window glass, you should be read each caution at first. Never damage painted surface and surrounded parts. REMOVAL Replacement Back Door Window Glass Remove back door inner finisher. Ref ...

Starter Motor
Engine VR35DDTT Type M001TF1771 MITSUBISHI make Reduction gear type System voltage (V) 12 No-load Terminal voltage (V) 11 Current (A) Less than 110 Revolution (rpm) More than 2,890 Clearance "L" between pinion front edge and pinion stopper [mm (in)] 0.5 - 2.0 (0.020 - 0.079) ...

Disassembly and Assembly
DISASSEMBLY Disengage the pawl and turn EVAP canister vent control valve counterclockwise. : Lock : Unlock Remove the EVAP canister vent control valve. ASSEMBLY Assemble in the reverse order of disassembly. CAUTION: Do not reuse O-rings. ...