WARNING:
INSPECTION
Appearance
Refer to Removal and Installation
Runout
Check the wheel bearing axial end play.
Refer to Inspection

| Runout (with it attached to the vehicle) | : Refer to Rear Disc Brake. |
CAUTION:
Refer to Removal and Installation
| Wear thickness | : Refer to Rear Disc Brake. |
Thickness
Refer to Removal and Installation

| Wear thickness | : Refer to Rear Disc Brake. |
ADJUSTMENT
CAUTION:
Drive vehicle on straight, flat road.
Drive without depressing brake for a few minutes to cool the brake.
Repeat steps 1 to 3 until pad and disc rotor are securely fitted.
Disc RotorRemoval and Installation
REMOVAL
Fully open back door.
Remove rear combination lamp cover. Refer to Removal and Installation.
Remove rear side spoiler fixing bolts .
Disengage rear side spoiler fixing clips as shown in the figure, and then remove rear side spoiler.
: Clip
INSTALLATION
Note the following items, and th ...
Removal and Installation
REMOVAL
Rear Door Parting Seal Front
Fully open rear door.
Remove rear door parting seal front clip.Apply protective tape (A) to rear door panel around rear door parting seal front clip for preventing damage.
Disengage fixing pawls using a remover tool (A), and then remove rear door parting seal f ...
Exploded View
Final drive mounting bracket Rear final drive assembly Upper stopper Lower stopper Washer : N·m (kg-m, ft-lb) : Always replace after every disassembly. ...