Diagnosis Procedure
INTELLIGENT REAR VIEW MIRROR FUNCTIONAL INSPECTION
-
Ignition switch ON.
-
Check the intelligent rear view mirror system is operating normally after setting power supply lever of intelligent rear view mirror lower part to ON.
Is the inspection result normal?
YES>>GO TO 3.
NO>>GO TO 2.
INTELLIGENT REAR VIEW MIRROR POWER SUPPLY INSPECTION
Check the ground circuit and intelligent rear view mirror power supply circuit. Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 3.
NO>>Repair or replace the malfunctioning parts.
INTELLIGENT REAR VIEW MIRROR CIRCUIT INSPECTION
-
Check the intelligent rear view mirror circuit. Refer to Diagnosis Procedure (With Driving Video Recorder System) or Diagnosis Procedure (Without Driving Video Recorder System).
-
Confirm the operation replacement.
Is the inspection result normal?
YES>>Repair or replace the malfunctioning parts.
NO>>Check intermittent incident. Refer to Intermittent Incident.
Other materials
With Vdc Tools and Preparation
Preparation
Special Service Tool
The actual shapes of the TechMate tools may differ from those of the special service tools illustrated here.
Tool number
(TechMate No.)
Tool name
Description
KV991J0080
(NI-45741-A)
ABS active wheel sensor tester
Checking operation of wheel sensors
...
Rack End Value Reset
Work Procedure
NOTE:
When steering column assembly and steering gear assembly are replaced, rack end value reset (steering wheel turning angle learning value reset) is performed.
When the toe-in is adjusted, back end value reset (steering wheel turning angle learning value reset) is performed.
...
Precautions
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front passenger fo ...