Diagnosis Procedure
CHECK AUTO RETRACTABLE DOOR MIRROR SYSTEM OPERATION
-
Set the auto retractable door mirror to be operable with the combination meter.
-
Check operation of auto retractable door mirror system.
Is the inspection result normal?
YES>>INSPECTION END
NO>>GO TO 2.
CHECK POWER WINDOW MAIN SWITCH AND PASSENGER DOOR MIRROR CONTROL MODULE POWER SUPPLY AND GROUND CIRCUIT
Check power window main switch and passenger door mirror control module power supply and ground circuit.
-
Power window main switch: Refer to Diagnosis Procedure.
-
Passenger door mirror control module: Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 3.
NO>>Repair or replace the malfunctioning parts.
CHECK POWER WINDOW MAIN SWITCH OR PASSENGER DOOR MIRROR CONTROL MODULE LIN COMMUNICATION CIRCUIT
Check power window main switch and passenger door mirror control module LIN communication circuit.
-
Power window main switch: Refer to Diagnosis Procedure.
-
Passenger door mirror control module: Refer to Diagnosis Procedure.
Is the inspection result normal?
YES>>GO TO 4.
NO>>Repair or replace the malfunctioning parts.
REPLACE BCM
-
Replace BCM. Refer to Removal and Installation.
-
Confirm the operation again.
Is the inspection result normal?
YES>>INSPECTION END
NO>>Check intermittent incident. Refer to Intermittent Incident.
Other materials
A/t Fluid Cooler
Cleaning
Whenever an A/T is replaced, the A/T fluid cooler mounted in the radiator must be inspected and cleaned.Metal debris and friction material, if present, can become trapped in the A/T fluid cooler. This debris can contaminate the newly serviced A/T or, in severe cases, can block or restrict t ...
Does Not Operate
Diagnosis Procedure
Automatic brake hold function does not operate when the operating conditions are satisfied.PERFORM SELF-DIAGNOSIS (CHASSIS CONTROL MODULE)
With CONSULT
Perform self-diagnosis for “CHASSIS CONTROL�.
Is DTC detected?
YES>>
Check the DTC. Refer to DTC Index.
NO>>
G ...
Zero Point Reset
Description
Zero point reset is an initializing procedure for occupant detection system that must be performed when replacing occupant detection system control unit or removing and installing passenger seat.If zero point reset is not performed, the initialization is incomplete and occupant detection ...