Automatic back door open/close function does not operate using Intelligent Key.
Diagnosis Procedure
Diagnosis ProcedurePrecautions for Removing Battery Terminal
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...
Component Inspection (Heated Steering Wheel Relay)
CHECK HEATED STEERING WHEEL RELAY CONTINUITY
Check continuity between heated steering wheel relay terminals.
CAUTION:
Connect the fuse between the terminals when applying the voltage.
Heated steering wheel relay Condition Continuity Terminal 3 − 5 Apply 12 V direct current between terminals ...
Diagnosis Procedure
NOTE:
Check the stop/start system operation condition. Refer to System Description.
CHECK STOP/START PROHIBIT CAUSE
With CONSULT
Select “Stop/Start prohibit cause data recorder” in “Work support” mode of “ENGINE” using CONSULT.
Does "Stop/Start prohibit cause data recorder" show fail-saf ...