Action Test
Work ProcedureWork Procedure
Always perform the side radar configuration after replacing the side radar.
SIDE RADAR CONFIGURATION
>>
GO TO 2.
SIDE RADAR ALIGNMENT
Perform the side radar alignment with CONSULT. Refer to Work Procedure.
>>
GO TO 3.
PERFORM SELF-DIAGNOSIS
Perform the self-diagnosis of side radar w ...
Exploded View
Roof rear garnish Luggage room lamp : Pawl : Vehicle front ...
Disassembly and Assembly
DISASSEMBLY
Put a matching mark between propeller shaft and flange yoke and remove snap rings .
CAUTION:
For matching mark, use paint. Never damage the surface.
Lightly tap bottom of yoke using a copper hammer and remove journal bearing.
CAUTION:
Never damage the yoke.
ASSEMBLY
Install journal ...