Diagnosis and Repair Work Flow
Work Flow
OVERALL SEQUENCE

DETAILED FLOW
INTERVIEW AND SYMPTOM CONFIRMATION
Interview the customer to obtain the malfunction information (conditions and environment when the malfunction occurred).
>>
GO TO 2.
CHECK DTC (LITHIUM ION BATTERY 12V)
-
Check DTC.
-
Perform the following procedure if DTC is detected.
-
Record DTC.
-
Erase DTC.
-
Is any DTC detected?
YES>>Check the detected DTC. Refer to DTC Index.
NO>>GO TO 3.
PERFORM DTC CONFIRMATION PROCEDURE
Perform DTC CONFIRMATION PROCEDURE for the detected DTC, and then check that DTC is detected again.
Is DTC detected?
YES>>GO TO 4.
NO>>Perform simulation test. Refer to Intermittent Incident.
DETECT MALFUNCTIONING PART BY DIAGNOSIS PROCEDURE
Inspect according to Diagnosis Procedure of the system.
Is malfunctioning part detected?
YES>>GO TO 5.
NO>>Perform simulation test. Refer to Intermittent Incident.
REPAIR OR REPLACE THE MALFUNCTIONING PART
-
Repair or replace the malfunctioning part.
-
Reconnect parts or connectors disconnected during Diagnosis Procedure again after repair and replacement.
-
Check DTC. If DTC is detected, erase it.
>>
GO TO 6.
FINAL CHECK
Perform again DTC confirmation procedure or component function check to confirm certainly the problem is repaired.
Is DTC detected?
YES>>GO TO 4.
NO>>Before returning the vehicle to the customer, always erase DTC.
Other materials
Electronic Air Suspension System Symptoms
Symptom Table
WARNING:
Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension component parts. Refer to Precaution for when Jacking and Lifting Up the vehicle with Electronic Air Suspension System.
Perform self-diag ...
Glove Box Lamp
Exploded View
Glove box lamp is integrated structure with glove box assembly. For exploded view of instrument panel assembly, refer to Exploded View.
Replacement
CAUTION:
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation for preventing electric leak ...
Bcm
Removal and Installation
CAUTION:
When replacing the BCM, always replace it with a new one. The functions controlled by the BCM does not operate properly in case of reuse of the BCM from another vehicle.
Be sure to perform the following items must be performed when replacing BCM.
Writing vehic ...