Nissan Armada 2025-2026 Service and Repair Manual: Lubricant

A/C compressor

Model DENSO make 7SAS17C Type Variable displacement swash plate Displacement cm3 (cu in)/rev Maximum 170 (10.4) Direction of rotation Clockwise (viewed from clutch) Drive belt Poly V ...

Refrigerant

Type HFO-1234yf (R-1234yf) Capacity kg (lb) 1.05 (2.32) ...

Other materials:

Diagnosis Procedure
COMBINATION SWITCH INSPECTION Check combination switch. Refer to Symptom Table. Is the inspection result normal? YES>> GO TO 2. NO>> Repair or replace the malfunctioning part. CHECK FRONT FOG LIGHT REQUEST SIGNAL With CONSULT Select “Front fog lamp request” in “Data Monitor” mo ...

Precautions for High Strength Steel (HSS) and Ultra High Strength Steel (UHSS)
High strength steel (HSS) means the steel from 440 MPa - 979 MPa. Ultra high strength steel (UHSS) means the steel above 980 MPa. (a) The repair of reinforcements (such as side members) by heating is not recommended since it may weaken the component. When heating is unavoidable, do not heat HSS part ...

Inspection of Welded Portion
Spot welded portions can be checked by the destructive inspections explained below. They can be easily adopted when welding. Before and after welding, you should perform these destructive inspections to check the strength of the welded portions. The welding spots should be equally spaced and arrange ...