Description
When replacing BCM, it is necessary to write MAC key to BCM. Write MAC key to BCM according to "MAC Key writing" procedure of "CONSULT Operation Manual". Refer to Work Procedure.
CAUTION:
During MAC key writing, maintain the following conditions:
-
Ignition switch ON
-
CONSULT is connected to internet
Work Procedure
PERFORM MAC KEY WRITING
-
Ignition switch ON.
-
Select "MAC key writing" on "Work support" of "BCM" using CONSULT.
-
Touch "Write".
>>
WORK END
Other materials
Assist grips
The Nissan Armada assist grips are strategically positioned above the front passenger
door and rear side doors to provide additional support for passengers during travel.
CAUTION
Do not use the Nissan Armada assist grips as a support when entering or exiting
the vehicle. Improper use may d ...
Inside Key Antenna
Console
Removal and Installation
REMOVALRemove front center console bracket. Refer to Removal and Installation.
Disconnect inside key antenna (console) harness connector.
Remove inside key antenna (console) fixing TORX bolts , and then remove inside key antenna (console) .
INSTALLATIONInstall in t ...
Driving Video Recorder Control Module
Removal and Installation
REMOVALCAUTION:
Before replacing driving video recorder control module, perform “ADDITIONAL SERVICE WHEN REPLACING DRIVING VIDEO RECORDER CONTROL MODULE”. For details, refer to Work Procedure.
Before replacing the driving video recorder control module, the customer s ...