Work FlowRemoval and Installation
REMOVAL
Remove front door finisher. Refer to Removal and Installation.
Remove front door inside handle fixing screws .
Remove front door inside handle fixing pawls, and then remove front door inside handle.
:Pawl
INSTALLATION
Note the following items, and then install in the reverse order o ...
Removal and Installation
WARNING:
REMOVAL
NOTE:
CAUTION:
Perform this step when the engine is cold.
Remove front bumper. Refer to Exploded View.
Remove front under cover. Refer to Removal and Installation.
Drain A/T fluid. Refer to Draining.
Remove A/T fluid cooler hose A and B from A/T fluid cooler. Refer to Removal and In ...
Exploded View
Bank 1 side
Water inlet hose Clamp Water inlet tube O-ring Heat insulator (upper) Oil return pipe 1 Oil return hose Oil return pipe 2 Heat insulator (lower) Water outlet tube Turbocharger assembly Gasket 1 Stud bolt Oil feed tube Eye bolt Gasket 2 Comply with the installation proc ...