Nissan Armada 2025-2026 Service and Repair Manual: Removal and Installation
REMOVAL
Remove front door finisher. Refer to Removal and Installation.
Remove front door inside handle fixing screws 
.
Remove front door inside handle fixing pawls, and then remove front door inside handle.
 | ：Pawl |
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
When connecting front door inside handle cable to front door inside handle, check that front door inside handle cable is properly engaged with front door inside handle.
After installation, check front door lock. Refer to Inspection.
Other materials:
Exploded View
Idler pulley Alternator Drive belt auto-tensioner Crankshaft pulley A/C compressor Water pump Drive belt A/C compressor belt View Indicator Range when new drive belt is installed Possible use range Always replace after every disassembly. ...
Adjustment Fitting of Front Fender
Fitting adjustment means adjustment of clearance or gradient of the hood, door, front fender, etc. with respect to its adjacent part, and adjustment of gradient at the press line.
Adjustment of front fender is described as an example.
Adjust the fitting at the front fender mounting position. Tighten ...
Removal and Installation
REMOVAL
CAUTION:
Drain engine coolant from cooling system. Refer to ENGINE COOLANT : Draining.
Disconnect rear cooler pipe assembly from rear A/C unit assembly. Refer to Removal and Installation.
Remove luggage side lower finisher RH. Refer to Removal and Installation.
Remove each duct.
Rear inlet ...
0.0061