NVH Troubleshooting ChartRemoval and Installation
CAUTION:
REMOVAL
Remove headlining assembly. Refer to Removal and Installation.
Disconnect harness connector.
Disengage personal lamp bracket fixing pawls using a remover tool (A) according to numerical order 1→2 indicated by arrows as shown in the figure, and then remove personal lamp and persona ...
Removal and Installation
REMOVAL
Remove rear moonroof glass. Refer to Removal and Installation.
Disengage sunshade stay using a remover tool (B) from sunshade slider as shown by the arrow in the figure.
CAUTION:
Apply protective tape (C) on remover tool to protect parts from damage.
Push sunshade stay according to nume ...
Work Procedure
START
With CONSULT
Ignition switch ON.
On CONSULT screen, select “ECM”>>“Work support”>>“Close throttle position learning”.
Follow the instructions on the CONSULT display.
Ignition switch OFF and wait at least 10 seconds.
Check that throttle valve moves during the above 10 se ...