Description
FRONT WIPER MOTOR PROTECTION FUNCTION
-
The CPU integrated in the front wiper motor may stop the front wiper to protect the front wiper motor if any obstruction (operation resistance) such as a large amount of snow is detected during the front wiper operation.
-
At that time turn OFF the front wiper and remove the foreign object. Then reactivate the front wiper. The wiper will operate normally.
REAR WIPER MOTOR PROTECTION FUNCTION
-
BCM may stop rear wiper to protect the rear wiper motor when the rear wiper is stopped for 5 seconds or more due to a snowfall.
-
Rear wiper operates normally 1 minute after the obstacles are removed with rear wiper OFF.
Other materials
Basic information
CAMERA/
button
WARNING
Improper use of the Nissan Armada Intelligent Around View Monitor system
may result in serious injury or even fatal accidents. Always follow all safety
instructions carefully.
The Nissan Armada Intelligent Around View Monitor is intended as a driver ...
Selective Unlock Function Does Not Operate
Diagnosis Procedure
CHECK “SELECTIVE UNLOCK” SETTING IN COMBINATION METER
Check “selective unlock” setting is ON.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Set “On” in combination meter.
REPLACE INTELLIGENT KEY UNIT
Replace Intelligent Key unit. Refer to Remova ...
Telematics Switch
Removal & Installation
REMOVALRemove the map lamp assembly. Refer to Removal and Installation.
Remove the microphone harness connector .
Use a suitable tool to release pawl and remove the switch finisher .
: Pawls
CAUTION:
Do not damage pawl.
Use a suitable tool to release pawls and rem ...