Diagnosis Procedure
CHECK “SELECTIVE UNLOCK” SETTING IN COMBINATION METER
Check “selective unlock” setting is ON.
Is the inspection result normal?
YES>>GO TO 2.
NO>>Set “On” in combination meter.
REPLACE INTELLIGENT KEY UNIT
-
Replace Intelligent Key unit. Refer to Removal and Installation.
-
Confirm the operation after replacement.
Is the result normal?
YES>>INSPECTION END
NO>>Check intermittent incident. Refer to Intermittent Incident.
Other materials
Stop/start System Inoperative
Diagnosis Procedure
NOTE:
Check the stop/start system operation condition. Refer to System Description.CHECK STOP/START PROHIBIT CAUSE
With CONSULT
Select “Stop/Start prohibit cause data recorder” in “Work support” mode of “ENGINE” using CONSULT.
Does "Stop/Start prohibit cause data reco ...
Action Test
Work Procedure
Always perform the rear automatic braking system action test to check that the system operates normally after replacing the ADAS control unit 2 or repairing any rear automatic braking system malfunction.CHECK REAR AUTOMATIC BRAKING SYSTEM SETTING
Start the engine.
Check that the r ...
Precautions
PRECAUTIONS FOR SUPPLEMENTAL RESTRAINT SYSTEM (SRS) AIR BAG AND SEAT BELT PRE-TENSIONER : Precautions
The Supplemental Restraint System such as “AIR BAG” and “SEAT BELT PRE-TENSIONER”, used along with a front seat belt, helps to reduce the risk or severity of injury to the driver and front p ...