When the back door position is in the range of
[between "just before fully closed"
and the position approximately less than 150 mm (5.91 in) from "just before fully closed"
], the back door does not operate even if any of switches are operated.
To operate the back door by switches, manually close the back door to "Fully closed"
position or manually open the back door approximately more than 150 mm (5.91 in) from the position of "Just before fully closed". And then operate any of switches.

Diagnosis ProcedureDiagnostic Work Sheet
DESCRIPTION
INTERVIEW SHEET SAMPLE
Interview sheet Customer name MR/MS Registration number Initial year registration Vehicle type VIN Storage date Engine Mileage km ( Mile) Situation where malfunction is occurred Malfunction category â–¡ Unable to brake    □ Unable to releaseâ ...
Removal and Installation
REMOVAL
Remove A/T assembly from the vehicle. Refer to following :
2WD models: Refer to Removal and Installation.
4WD models: Refer to Removal and Installation.
Remove the drive plate using the following procedure:Secure crankshaft pulley with a pulley holder (A).
Loosen drive plate bolts and r ...
How to enable/disable the I-DA system
Vehicle information display
Steering-wheel-mounted control (right side)
To enable or disable the Intelligent Driver Alertness system in the Nissan Armada,
follow these steps:
1. Press the
button until "Settings" appears in the vehicle information display, then confirm
...