REPLACE BCM
Replace BCM. Refer to Removal and Installation.
Confirm the operation after replacement.
Is the result normal?
YES>>INSPECTION END
NO>>Check intermittent incident. Refer to Intermittent Incident.
Normal Operating ConditionRemoval and Installation
REMOVAL
Remove rear moonroof glass. Refer to Removal and Installation.
Disengage sunshade stay using a remover tool (B) from sunshade slider as shown by the arrow in the figure.
CAUTION:
Apply protective tape (C) on remover tool to protect parts from damage.
Push sunshade stay according to nume ...
Inspection
Open and close rear door. Check that rear door hinge and rear door check link rotation portion moves smoothly.
Check rear door hinge rotating part for lubrication condition. Apply body grease if necessary.
: Body grease
Check rear door check link rotating part for lubrication condition. Apply ...
NVH Troubleshooting Chart
Use chart below you find the cause of the symptom. If necessary, repair or replace these parts.
Possible cause and SUSPECTED PARTS Symptom Reference DRIVE SHAFT REAR AXLE Noise Shake Noise Shake Vibration Shimmy Judder Poor quality ride or Excessive joint angle × × — — — ...