The parking brake is not applied even when the parking brake switch is pulled.
Diagnosis Procedure
Diagnosis ProcedureRemoval and Installation
REMOVAL
CAUTION:
Never reuse combination switch. Always replace it with a new one when it is removed.
Remove spiral cable. Refer to Removal & Installation.
Disconnect harness connector from combination switch.
Remove the combination switch mounting screw .
Pull out the combination switch by ...
Removal and Installation
CAUTION:
REMOVAL
Remove headlining assembly. Refer to Removal and Installation.
Disconnect harness connector.
Disengage personal lamp bracket fixing pawls using a remover tool (A) according to numerical order 1→2 indicated by arrows as shown in the figure, and then remove personal lamp and persona ...
Procedure for Applying Body Filler
(1) REMOVAL OF PAINT
Using an air sander, remove old paint and "scuffing" the panel surface for better filler adhesion. Form a featheredge on the panel surface approximately 20 mm (0.79 in) wider than the correction area in order to eliminate traces of body filler application.
(2) CHEMICAL CONVERSIO ...