Nissan Armada 2025-2026 Service and Repair Manual: PARTS REQUIRING ANGLE TIGHTENING
Use the angle wrench [SST: KV10112100 (BT-8653-A)] for the final tightening of the following engine parts:
Camshaft sprocket (INT) bolt
Cylinder head bolts
Main bearing cap bolts
Connecting rod cap bolts
Crankshaft pulley bolt (No the angle wrench is required as bolt flange is provided with notches for angle tightening)
Do not use a torque value for final tightening.
The torque value for these parts are for a preliminary step.
Ensure thread and seat surfaces are clean and coated with engine oil.
LIQUID GASKET
REMOVAL OF LIQUID GASKET SEALING
After removing mounting nuts and bolts, separate the mating surface using the seal cutter [SST: KV10111100 (NI-37228)] (A) and remove old liquid gasket sealing.
CAUTI ...
DEFINITIONS OF BANK NAMES
In this manual, each bank name is defined as follows:
: Bank 1 (The conventional right bank) : Bank 2 (The conventional left bank) : Engine front
For cylinder numbers and bank layout, refer to th ...
Other materials:
Inspection Procedure
Refer to Table of Contents for specific component removal and installation information.
INSTRUMENT PANEL
Most incidents are caused by contact and movement between:
Cluster lid A and instrument panel
Acrylic lens and combination meter housing
Instrument panel to front pillar garnish
Instrument panel ...
Exploded View
Crankcase ventilation valve* Crankcase ventilation valve bolt* Resonator* Air duct 1 Gasket Air duct 3 (bank 1) Air duct 2 (bank 1) Inlet air duct 2 Bracket 1 Bracket 2 Air duct 2 (bank 2) Air duct 3 (bank 2) Grommet Mounting rubber Inlet air duct 1 Clip Air guide Air cleaner body ...
Flat tire
Tire Pressure Monitoring System (TPMS)
The Nissan Armada is equipped with an advanced Tire Pressure Monitoring System
(TPMS) that continuously tracks the air pressure in all four tires (excluding the
spare tire) to ensure optimal safety and performance.
When tire pressure drops significantly b ...
0.0052