Perform the steering column position learning when the following conditions are performed. For details, refer to Work Procedure.
Work Procedure
Work ProcedureRemoval and Installation
REMOVAL
CAUTION:
Never damage the back door panel.
Remove back door trim. Refer to Removal and Installation.
Disconnect harness connectors.
Remove mounting nuts .
Apply protective tapes (A) on the parts to protect it from damage.
Disengage fixing clips using remover tool (A).
: Clip
Disconn ...
Door Does Not Lock/unlock with Intelligent Key
All doors do not lock/unlock using Intelligent Key button.
NOTE:
SYMPTOM TABLE (BOTH INTELLIGENT KEYS HAVE THE SAME SYMPTOMS)
Door lock operation (remote keyless entry) Door lock operation (one touch sensor or request switch of front/rear/back door) or trunk/back door open operation (opener switch ...
EXHAUST SYSTEM : Exploded View
Mounting rubber 1 Main muffler Mounting rubber 2 Gasket Mounting bracket Mounting rubber 3 Rear muffler Mounting rubber 4 To catalyst. Refer to Exploded View. : N·m (kg-m, ft-lb) : Always replace after every disassembly. : Indicates that the parts is connected at points with same symbo ...