Exploded View
 |
Headlining assembly |  |
Personal lamp |  |
Personal lamp bracket |
 |
: Pawl | ||||
| : vehicle front | |||||
Removal and Installation
CAUTION:
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation for preventing electric leakage. Refer to Precautions for Removing Battery Terminal.
REMOVAL
Remove headlining assembly. Refer to Removal and Installation.
Disconnect harness connector.
Disengage personal lamp bracket fixing pawls using a remover tool (A) according to numerical order 1→2 indicated by arrows as shown in the figure, and then remove personal lamp and personal lamp bracket.
|
: Pawl |
INSTALLATION
Install in the reverse order of removal.
Replacement
CAUTION:
-
Disconnect the battery negative terminal or remove power circuit fuse when performing the operation for preventing electric leakage. Refer to Precautions for Removing Battery Terminal.
-
Replacement of bulb is not possible due to the adoption of LED. When replacement, replace personal lamp as a single part. Refer to Removal and Installation.
Other materials
Heater & Air Conditioning System Tools and Preparation
Commercial Service Tools
HFO-1234yf (R-1234yf) Service Tool and Equipment
Never mix HFO-1234yf (R-1234yf) refrigerant and/or its specified lubricant with CFC-12 (R-12) or HFC-134a (R-134a) refrigerant and/or its lubricant.
Separate and non-interchangeable service equipment must be used for handli ...
Cooler Pipe and Hose
Exploded View
FRONT
Front heater & cooling unit assembly
O-ring
High-pressure pipe
Valve cap (high-pressure side)
Tube clip 1
Washer seal
Condenser & liquid tank assembly
High-pressure flexible hose
Low-pressure flexible hose
Valve cap (low-pressure side)
L ...
Fender Protector
Exploded View
Off Road Models
Fender protector
Spring nut
Fender clip
Grommet
N·m (kg-m, in-lb)
City Models
Fender protector
Spring nut
Fender clip
Grommet
N·m (kg-m, in-lb)
...