Removal and Installation
CAUTION:
Never bend the fixing pawl of front armrest LH.
REMOVAL
Remove front door finisher LH. Refer to Removal and Installation.
Disconnect power window main switch harness connector and door lock and unlock switch harness connector.
Remove front door squawker LH from front door finisher LH (if equipped). Refer to Removal & Installation.
Remove front armrest LH fixing screws
, and then remove front armrest LH
from front door finisher LH
.

![]() |
: Pawl |
Remove power window main switch fixing screws
, and then remove power window main switch
from front armrest LH
.

![]() |
: Pawl |
NOTE:
Remove front armrest LH fixing part
and secure the work space.
INSTALLATION
Install in the reverse order of removal.
Other materials
Upper Link
Exploded View
Frame
Upper link
Steering knuckle
: Always replace after every disassembly.
: N·m (kg-m, ft-lb)
Removal and Installation
WARNING:
Jacking up or lift up the vehicle may the vehicle height to go down which cause a personal injury and/or damage to the air suspension ...
Air Suspension Control Module
Exploded View
Air suspension LH duct assembly
Breather hose (exhaust)
Breather hose (intake)
Air suspension control module
Bracket
Air connector
Air tube
Air suspension control module harness connector
To rear RH air spring
To rear LH air s ...
Usb Connector
Removal & Installation
REMOVALRemove the front center console cup holder assembly. Refer to Disassembly and Assembly.
Release the pawls and remove the USB connector from the front of the front center console cup holder assembly.
: Pawl
CAUTION:
Do not damage pawls.INSTALLATIONInstallatio ...
