PrecautionsDiagnosis Procedure
CHECK “AUTO DOOR UNLOCK” SETTING IN COMBINATION METER
Check “Auto Door Unlock” setting is “Shift to P”.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Set “Shift to P” in combination meter.
REPLACE BCM
Replace BCM. Refer to Removal and Installation.
Confirm the op ...
Removal and Installation
REMOVAL
Remove spiral cable assembly. Refer to Removal and Installation.
Remove steering angle sensor from spiral cable.
INSTALLATION
Note the following, and install in the reverse order of removal.
When replacing the angle sensor , if the lock pin is installed, remove the lock pin after installing ...
Diagnostic Work Sheet
Description
Interview sheet sample
Interview sheet Customer name MR/MS Registration number Initial year registration Vehicle type VIN Storage date Engine Mileage km ( Mile) Symptom □Differential lock indicator lamp does not turn ON with differential lock mode switch ON. □Di ...