PrecautionsSide Body
WARNING:
Work after hoodledge reinforcement and roof are removed.
Remove the lower side dash assembly (reusable) from the vehicle for easier installation.
Urethane foam : Weld the parts onto the back of the component part.
*: For spot welding of steel plate of tensile strength 980 MPa, observe the ...
Precautions for Removing Battery Terminal
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...
Inspection and Adjustment
WARNING:
INSPECTION
Check brake pad wear thickness from an inspection hole on cylinder body. Check using a scale if necessary.
Wear thickness : Refer to Front Disc Brake.
ADJUSTMENT
Burnish contact surfaces between disc rotor and brake pads according to the following procedure after refinishing ...