Precaution
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"Work Procedure
When driver monitor camera control unit is replaced, be sure to perform the specified incidental work in order to operate system normally.
DRIVER MONOTOR CAMERA CONTROL UNIT CONFIGURATION
>>
GO TO 2.
CHECK DATA MONITOR
Check that "Face" is "within range" in "Data monitor" of "Driver Monitor ...
Removal and Installation
REMOVAL
Using a suitable tool, release clips , and remove cover .
Disconnect inside camera (driving video recorder) harness connector.
Remove mounting screws , and remove inside camera (driving video recorder) from inside camera bracket.
Remove mounting screws , and remove inside camera bracket ...
Removal and Installation
WARNING:
REMOVAL
Remove engine under cover. Refer to Exploded View.
Release hose clamp , and remove air breather hose B from final drive assembly.
Remove clip C from bracket .
Remove bracket mounting bolt ( ) and remove bracket .
Remove clip B .
Remove clip A .
Remove air breather hose ...