NIARMADA Nissan Armada manuals & owner information
Nissan Armada owner resource

Manuals, service information and practical owner guidance.

Fast access to Nissan Armada owner manuals, service procedures, maintenance references, technical information and practical guides for different Armada generations.

Browse manuals →
Nissan Armada manual library

Nissan Armada 2025-2026 Service and Repair Manual: Precautions for Removing Battery Terminal

Nissan Armada 2025-2026 Service and Repair Manual / Engine / Engine Control System. Vr35ddtt / Precautions for Removing Battery Terminal

PRECAUTIONS FOR REMOVING BATTERY TERMINAL : Precautions

  • When disconnecting the 12V battery terminal, turn off the ACC power before disconnecting the 12V battery terminal, observing “How to disconnect 12V battery terminal” described below.

    NOTE:

    Some ECUs operate for a certain fixed time even after ignition switch is turned OFF and ignition power supply is stopped. If the battery terminal is disconnected before ECU stops, accidental DTC detection or ECU data damage may occur.

  • For Nissan Armada vehicles with the 2-batteries, be sure to connect the main battery and the sub battery before turning ON the ignition switch.

    NOTE:

    If the ignition switch is turned ON with any one of the terminals of main battery and sub battery disconnected, then DTC may be detected.

  • After installing the 12V battery, always check "Self Diagnosis Result" of all ECUs and erase DTC.

    NOTE:

    The removal of 12V battery may cause a DTC detection error.

HOW TO DISCONNECT 12V BATTERY TERMINAL

Disconnect 12V battery terminal according to instruction described below.

  1. Open the hood.

  2. Turn ignition switch to the ON position.

  3. Turn ignition switch to the OFF position with the driver side door opened.

  4. Get out of the vehicle and close the driver side door.

  5. Wait at least 3 minutes. For vehicle with the engine listed below, remove the battery terminal after a lapse of the specified time.

    BR08DE : 4 minutes R9N engine : 12 minutes
    BR10DE : 12 minutes V9X engine : 4 minutes
    D4D engine : 20 minutes YD25DDTi : 2 minutes
    HR09DET : 12 minutes YS23DDT : 4 minutes
    HR10DDT : 12 minutes YS23DDTT : 4 minutes
    HR10DET : 12 minutes ZD30DDTi : 60 seconds
    HR13DDT : 12 minutes ZD30DDTT : 60 seconds
    HRA2DDT : 12 minutes K9K engine : 4 minutes
    M9R engine : 4 minutes R9M engine : 4 minutes

    CAUTION:

    While waiting, never operate the vehicle such as locking, opening, and closing doors. Violation of this caution results in the activation of ACC power supply according to the Auto ACC function.

  6. Remove 12V battery terminal.

    CAUTION:

    After installing 12V battery, always check self-diagnosis results of all ECUs and erase DTC.

    Other materials

    Additional Service When Replacing Third Seat Control Unit Lh
    Description When after replacing third seat control unit LH, third seat LH position initialization must be performed. For details, refer to Work Procedure. Work Procedure REPLACE THIRD SEAT CONTROL UNIT LH Replace third seat control unit LH. Refer to Removal and Installation. >> GO TO 2. TH ...

    Moonroof Motor Assembly
    Exploded View Refer to Exploded View. Removal and Installation REMOVALCAUTION: Before removing moonroof motor, check that glass lid is fully closed. After removing moonroof motor, never attempt to rotate moonroof motor assembly as a single unit. Remove headlining to make work space. Refer to Re ...

    Location of Plastic Parts
    Precautions for Plastics Abbreviation Material name Heat resisting temperature °C (°F) Resistance to gasoline and solvents Other cautions PE Polyethylene 60 (140) Gasoline and most solvents are harmless if applied for a very short time (wipe out quickly). Flammable ABS Acrylon ...