Nissan Armada 2025-2026 Service and Repair Manual: Precautions during Dust Generating Work
Workers must use a sander equipped with a dust collecting function.
Workers must work in the facilities where a dust collector is installed on the floor or the wall.
Danger from Dust
If workers continue to inhale dust generated during paint film removal or body filler grinding work for long periods, they may suffer from respiratory insufficiency, which results in pneumoconiosis or ...
Protector and Equipment
(1) DUSTPROOF RESPIRATOR
This is an important protector to prevent workers from inhaling dust.
The cup type, gauze type, and other types of respirators are available.
The respirators with the deodoriz ...
Other materials:
Inspection
WARNING:
INSPECTION AFTER REMOVAL
Use the standard type spark plug for normal condition.
Spark plug (Standard type) : Refer to Spark Plug.
CAUTION:
Never drop or shock spark plug.
Never use a wire brush for cleaning.
If plug tip is covered with carbon, use spark plug cleaner to clean.
Cleaner a ...
Removal and Installation
WARNING:
REMOVAL
Disconnect the battery cable from negative terminal. Refer to Removal and Installation
Drain brake fluid. Refer to Draining.
Disconnect ABS actuator and electric unit (control unit) harness connector , follow the procedure below.
Pull the lock of the connector toward the directi ...
Inspection
DRIVE PLATE DEFLECTION
Appearance of Drive Plate
Check the drive plate and signal plate for defamation or damage.
CAUTION:
Do not disassemble drive plate.
Do not place drive plate with signal plate facing down.
When handling signal plate, take care not to damage or scratch it.
Handle signal pla ...
0.0055