Nissan Armada 2025-2026 Service and Repair Manual: PRECAUTIONS FOR HOOD OPEN IDLE UP: Precautions
ECM controls to increase the idling speed when the hood is opened. Refer to Inspection.
When checking the idling speed during inspection and maintenance, perform "Hood open idle up cancel mode". Refer to Removal and Installation.
Precautions for Removing Battery Terminal
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open th ...
Precautions for Harness Repair
Solder the repaired area and wrap tape around the soldered area.
NOTE:
A fray of twisted lines must be within 110 mm (4.33 in).
Bypass connection is never allowed at the repaired area.
NOTE:
...
Other materials:
Precautions for Removing Battery Terminal
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the d ...
Exploded View
REMOVAL
Front wiper blade RH Front wiper arm RH Front wiper arm cap Front wiper drive assembly Front wiper arm LH Front wiper blade LH : N·m (kg-m, in-lb) : N·m (kg-m, ft-lb)
DISASSEMBLY
Front wiper linkage Front wiper pivot assembly Pivot cover Front wiper motor assembly : Body gr ...
Types of MAG Welding
Welding Methods Using Gas Shielded Arc Welding
NOTE:
Before MAG welding is performed on body components, some test welds should be carried out on offcuts of the replacement part that are not being used. When doing so, the welder settings can be optimized for the relevant material. The table shows so ...
0.0072