Solder the repaired area and wrap tape around the soldered area.

NOTE:
A fray of twisted lines must be within 110 mm (4.33 in).
Bypass connection is never allowed at the repaired area.

NOTE:
PRECAUTIONS FOR HOOD OPEN IDLE UP: Precautions
Precaution for Automatic Brake HoldRemoval and Installation
CAUTION:
REMOVAL
CAUTION:
Apply protective tape (A) on roof rear garnish to protect it from damage.
: Vehicle front
Disengage luggage room lamp fixing pawl using a remover tool (A), and then pull out luggage room lamp from roof rear garnish.
: Pawl : Vehicle front
Disconnect harness conne ...
Diagnosis Procedure
NOTE:
CHECK REAR HEATER HOSE
Check installation of rear heater hose by visually or touching.
Is the inspection result normal?
YES>>
GO TO 2.
NO>>
Repair or replace parts depending on the inspection results.
CHECK REAR HEATER CORE
Check temperature of inlet hose and outlet hose of rear ...
Work Procedure
WARNING:
UNIT CHARACTERISTIC VALUE CONFIRMATION
: Side surface : Top surface
NOTE:
There is space on the top to check with the camera.
>>
GO TO 2.
WRITING UNIT PARAMETER
With CONSULT
Ignition switch ON.
Select “Work support” in “AWD/4WD”.
Perform “Unit parameter writing” to t ...