
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the driver side door opened.
Get out of the vehicle and close the driver side door.
| BR08DE | : 4 minutes | R9N engine | : 12 minutes |
| BR10DE | : 12 minutes | V9X engine | : 4 minutes |
| D4D engine | : 20 minutes | YD25DDTi | : 2 minutes |
| HR09DET | : 12 minutes | YS23DDT | : 4 minutes |
| HR10DDT | : 12 minutes | YS23DDTT | : 4 minutes |
| HR10DET | : 12 minutes | ZD30DDTi | : 60 seconds |
| HR13DDT | : 12 minutes | ZD30DDTT | : 60 seconds |
| HRA2DDT | : 12 minutes | K9K engine | : 4 minutes |
| M9R engine | : 4 minutes | R9M engine | : 4 minutes |
CAUTION:
Remove 12V battery terminal.
CAUTION:
Precaution
Precaution for Electronic Air Suspension SystemWelding of Ultra High Strength Steel
SPOT WELDING
Spot welding is limited to ultra high strength steel (tensile strength: 980 MPa) according to the welding conditions listed below.
CAUTION:
If the below welding conditions cannot be met, then perform plug welding.
Never spot weld ultra high strength steel of tensile strength more than 9 ...
Exploded View
Luggage side upper finisher RH Rear pillar finisher RH Luggage side lower finisher RH Seat belt hook Seat switch escutcheon RH Rope hook Back pillar garnish LH Luggage side upper finisher LH Rear pillar finisher LH Seat switch escutcheon LH Luggage side lower finisher LH Luggage floor r ...
FUEL TANK : Exploded View
Fuel tank mounting band (Rear) Fuel tank mounting band cover Clip 1 Fuel tank side protector 1 Clip 2 Fuel tank side protector 2 Fuel tank upper protector Fuel tank front protector Fuel tank mounting band (Front) Fuel tank Fuel tank protector Vent tube Clamp Fuel filler hose 1 Fuel f ...