
NOTE:
NOTE:
NOTE:
The removal of 12V battery may cause a DTC detection error.
HOW TO DISCONNECT 12V BATTERY TERMINAL
Disconnect 12V battery terminal according to instruction described below.
Open the hood.
Turn ignition switch to the ON position.
Turn ignition switch to the OFF position with the driver side door opened.
Get out of the vehicle and close the driver side door.
| BR08DE | : 4 minutes | R9N engine | : 12 minutes |
| BR10DE | : 12 minutes | V9X engine | : 4 minutes |
| D4D engine | : 20 minutes | YD25DDTi | : 2 minutes |
| HR09DET | : 12 minutes | YS23DDT | : 4 minutes |
| HR10DDT | : 12 minutes | YS23DDTT | : 4 minutes |
| HR10DET | : 12 minutes | ZD30DDTi | : 60 seconds |
| HR13DDT | : 12 minutes | ZD30DDTT | : 60 seconds |
| HRA2DDT | : 12 minutes | K9K engine | : 4 minutes |
| M9R engine | : 4 minutes | R9M engine | : 4 minutes |
CAUTION:
Remove 12V battery terminal.
CAUTION:
Precaution for Supplemental Restraint System (SRS) "AIR BAG" and "SEAT BELT PRE-TENSIONER"Frame Component Parts
2WD MODELS
Refer to parts catalogue for the replacement parts.
: Both sided anti-corrosive precoated steel sections
: High strength steel (HSS) sections
: Aluminum portion
No. Parts name Tensile
strength
(MPa) Both sided
anti-corrosive
precoated
steel sections Aluminum
portion Frame assembly ...
Diagnosis Procedure
PERFORM SELF-DIAGNOSIS
With CONSULT
Pull the parking brake switch.
NOTE:
Check to make sure that the parking brake switch indicator is turned ON.
Ignition switch OFF.
Get out of the vehicle and close all doors.
Wait 65 seconds.
NOTE:
Check to make sure that the parking brake switch indicator is turn ...
Inspection and Adjustment
WARNING:
INSPECTION
Appearance
Refer to Removal and Installation
Runout
Check the wheel bearing axial end play.
Refer to Inspection
Runout (with it attached to the vehicle) : Refer to Rear Disc Brake.
CAUTION:
Refer to Removal and Installation
Wear thickness : Refer to Rear Disc Brake.
T ...