Inspection
Exploded ViewBasic Repair Procedure
(1) WHEN PLASTIC DEFORMATION OCCURS AT THE CENTER OF THE DAMAGED PORTION
(a) Using a hammer or dolly, strike the lowest portion of the dent from behind until it becomes flat.
(b) Using the hammer-off-dolly method as shown in the figure, raise the concave portion and lower the convex portion.
Then ...
Disassembly and Assembly
CAUTION:
OUTSIDE SEAT CUSHION FINISHER OUTER
Disassembly
Disengage fixing pawls, and then remove reclining knob cap.
: Pawl
Disengage fixing portion using a remover tool (A) according to numerical order 1→2 indicated by arrows as shown in the figure, and then remove reclining knob.
Remove ...
Exploded View
FRONT
Front heater & cooling unit assembly O-ring High-pressure pipe Valve cap (high-pressure side) Tube clip 1 Washer seal Condenser & liquid tank assembly High-pressure flexible hose Low-pressure flexible hose Valve cap (low-pressure side) Low-pressure pipe Tube clip 2 Front ...