Symptom Table
NOTE:
Perform self-diagnoses with CONSULT before performing the symptom diagnosis. If any DTC is detected, perform the corresponding diagnosis.
| Symptom | Corresponding malfunction part | Check item/Reference | |
|---|---|---|---|
| Rear air conditioning system does not activate. | Rear A/C switch | Display unit operation |
Check AV system. Refer to Work Flow. |
| Rear air conditioning cannot be controlled. | All control |
|
Check rear A/C control power supply and ground circuits. Refer to Diagnosis Procedure. |
| A part of control | Rear A/C control |
Replace rear A/C control. Refer to Removal and Installation. |
|
| Discharge air temperature does not change. |
|
Check rear air mix door motor circuit. Refer to Diagnosis Procedure. |
|
| Air outlet does not change. |
|
Check rear mode door motor circuit. Refer to Diagnosis Procedure. |
|
| Rear blower motor does not operates or operation speed is not normal. |
|
Check rear blower motor circuits. Refer to Diagnosis Procedure. |
|
|
|
Symptom Diagnosis Insufficient cooling Refer to Diagnosis Procedure. |
|
|
|
Symptom Diagnosis Insufficient heating Refer to Diagnosis Procedure. |
|
| Noise is heard when the air conditioning operates. |
|
Check rear blower motor. Refer to Component Inspection (Rear Blower Motor). |
|
| Biometric cooling control does not activate. | IR sensor |
Check IR sensor. Refer to Diagnosis Procedure. |
|
Other materials
Windshield Glass
Exploded View
Windshield molding
Dam sealant rubber upper
Clip
Insulator
Dam sealant rubber
Spacer
Windshield glass
Roof panel
Adhesive
Painted surface primer
Glass primer
Body side outer panel
Dash panel
: Bracket
: Insid ...
Front Wiper
Exploded View
REMOVAL
Front wiper blade RH
Front wiper arm RH
Front wiper arm cap
Front wiper drive assembly
Front wiper arm LH
Front wiper blade LH
: N·m (kg-m, in-lb)
: N·m (kg-m, ft-lb)
DISASSEMBLY
Front wiper linkage
Front wiper pivot assembly
Pivot cover
...
The Meter Speaker Does Not Sound
Diagnosis Procedure
The meter speaker does not sound.CHECK COMBINATION METER INPUT SIGNAL
Select the “Data Monitor� for the “Combination meter� and check the “BUZZER� monitor value.
“BUZZER�
Under the condition of speaker input
: On
Other than the above
: Off
Is ...