Removal and Installation
CAUTION:
Never bend the fixing pawl of rear armrest.
REMOVAL
Remove rear door finisher. Refer to Removal and Installation.
Disconnect rear power window switch harness connector.
Remove rear armrest fixing screws 
, and then remove rear armrest 
from rear door finisher 
.
 |
: Pawl |
Remove rear power window switch from rear armrest .
|
: Pawl |
INSTALLATION
Install in the reverse order of removal.
Other materials
Intelligent Driver Alertness (I-DA)
Basic information
WARNING
Failure to strictly follow all safety warnings and operating instructions
related to the Intelligent Driver Alertness system in the Nissan Armada may result
in serious injury or fatal accidents.
The Nissan Armada I-DA system is designed исключительно ...
System temporarily unavailable
When any of the following messages appear on the vehicle information display,
a chime will sound and the I-BSI system will be turned off automatically.
"Unavailable Slippery Road": When the VDC system (except traction control
system function) or ABS operates.
"Currently Una ...
Camera Aiming Adjustment
Work Procedure
Always adjust the camera aiming after removing and installing or replacing the front camera unit.
Always adjust the camera aiming after removing and installing or replacing the windshield glass.
CAUTION:
Place the vehicle on level ground when the camera aiming adjustment is ope ...