Removal and Installation
REMOVAL
Remove rear door finisher. Refer to Removal and Installation.
Remove rear door inside handle fixing screws 
.
Remove rear door inside handle fixing pawls, and then remove rear door inside handle.
 |
：Pawl |
INSTALLATION
Note the following items, and then install in the reverse order of removal.
CAUTION:
-
When connecting rear door inside handle cable to rear door inside handle, check that rear door inside handle cable is properly engaged with rear door inside handle.
-
After installation, check rear door lock. Refer to Inspection.
Other materials
Electrical Brake Control Unit
Exploded View
Reservoir cap
Electrical brake control unit
Bracket
Caution label
Gasket
Spacer
: N·m (kg-m, ft-lb)
: N·m (kg-m, in-lb)
: Always replace after every disassembly.
Removal & Installation
WARNING:
Jacking up or lift up the vehicle may the vehicle ...
Front Air Conditioner
Description
Symptom
Insufficient heating
No warm air comes out. (Air flow volume is normal.)
Diagnosis Procedure
NOTE:
Perform self-diagnoses with CONSULT before performing symptom diagnosis. If any DTC is detected, perform the corresponding diagnosis.CHECK COOLING SYSTEM
Check engine coolant ...
Anti-Pinch Inspection
Description
If any of the following operations are performed, the initialization is necessary for normal operation of anti-pinch function. Refer to Work Procedure.
When each power window motor replaced.
Power supply to the each power window motor is not cut off properly.
Removal and install ...